ExecutiveChronicles.com | Blocked Drain Causing Troubles? Read the Steps Mentioned Below to Clear the Blocked Drain | Many people are unconcerned with their drains before something goes wrong. A drain is more than just a stopper at the bottom of your sink or tub; it is responsible for transporting water from your home via the plumbing system. Backed-up toilets, slow-draining sinks, and standing water in the tub are just a few of the annoying issues that indicate it’s time to get out the plumbing equipment or call a pro.
We have listed some ways on how to Unclog the Blocked Drain of a Kitchen Sink:
These tried-and-true methods can get rid of almost every clog. If you are unable to remove the blocked drain clog even after attempting it over and over again, it’s time to call for a drain-cleaning service or a licenced plumber.
What do you need to clear or unclog blocked drain?
- A plunger is the very first tool to go for when you experience blocked drains in Newcastle. Clogs can be removed from most fixtures, including sinks, tubs, and toilets, with the help of this plumber’s pal. It can reach out to long distances and depths and can scoop out excess dust and dirt.
- Using a cable auger, also known as a plumber’s snake, to clear clogs further down the drainpipeCable augers come in lengths up to 100 feet, but for most household clogs, a 25-foot model will suffice.
- An auger is used for snaking the plumbing. It has a hand crank, but instead of a spool, the cable is encased in a rigid shaft. However, it is generally advised not to use the auger too tightly, not to put much pressure as in that case the auger might break also.
- An electrician power auger is also beneficial. This device, which is basically a large cable auger with an electric motor, can cut through almost any clog, including tangled tree roots. Make sure the rental agent shows you how to use the electric auger.
The Process of Cleaning and Unclogging Blocked Drains
The trap and the drain pipe
- The plunger can remove most minor sink clogs.
- Fill the sink halfway with water, then work the plunger up and down several times before easily removing it from the drain opening. Place a wet rag in one of the drain openings when plunging the other if you have a double-bowl sink. Put the rag in the overflow hole if it’s a bath drain. The rag aids in applying direct pressure to the clog.
- When the plunger does not show the required results then grab the cable auger to start working under the sink to clear the blocked drain.
- Using a pipe wrench, remove the sink trap. PVC plastic traps can be easily unscrewed by hand.
Remove the Blockage
- Remove the protruding horizontal trap arm from the stub out in the wall.
- Push the cable until it is unable to move forward due to the clog.
- Then tighten the lock screw.
- To force the cable deeper into the shaft, turn the handle clockwise and press forward at the same time.
- Repeat the procedure with the cable until you’ve broken through the blockage.
- Turn the crank counterclockwise and pull back on the auger if the cable bogs down or catches on something.
- Crank and press forward until the cable is clear.
- Replacing the trap arm and trap is as simple as retrieving the rope. Check to see if the sink drains correctly by turning on the hot water faucet. Don’t stress if it doesn’t.
- Cover the sink halfway with hot water and remove the debris with the plunger.
- Add more hot water to the mix.
There can be regular cases of a blocked drain, but if you hire the best quality plumbers who have license and years of experience, you can avail of neat work with the best benefits.