7 Crane Safety Tips You Need to Remember | Cranes are potential dangers, as both the cranes and the cargo they transport might cause severe injury if workers manage them poorly. The Bureau of Labor Statistics recorded 297 crane-related deaths between 2011 and 2017.
More than half of the deaths were caused by employees being struck by objects or equipment. And the crane operator was involved in more than 20% of the cases. These figures emphasize the need for crane safety throughout the process, including transport, setup, rigging, and lifting.
So with these statistics in mind, let’s look at seven crane safety tips you need to remember.
- Always Employ Qualified Workers
Some companies may allow unqualified individuals to help in the setting up and dismantling of cranes.
Skilled workers should deal with the setup, signaling, rigging, and operation to be safe. You should only allow qualified and appropriately evaluated personnel to operate cranes on work sites.
Be sure you follow all requirements to ensure that qualified persons operate your cranes at all times.
- Choose the Right Crane for the Job
Choosing the right crane is the first step in ensuring safe crane operation. You can select cranes that are stationary or movable. Construction workers tend to use fixed cranes in industrial environments or for large, complicated construction projects.
Some crane options include an all-terrain crane, carry deck crane, and crawler crane, for example. Do your research and use the right one to prevent crane accidents.
- Read Your Operator Manuals
It’s vital to remember that cranes from different manufacturers have varied controls, failsafe mechanisms, and features. So even competent workers should take note of this and check the manual when using a crane.
Anyone who operates or works with cranes should have a thorough grasp of the crane in question. If they don’t, they’ll be putting others at risk.
- Always Carry Out Pre-Start Checks
The operator should inspect things such as the tire conditions, oil levels, air reservoir, and batteries before starting the crane.
Once your operator turns the engine on, they should also check things such as:
- The pressure gauge
- The fuel level
- The turn signals
- The horn
- The suspension
You must carry out these essential safety system inspections to avoid catastrophes. Ensure that the rated capacity limitation, the anti-two block, and the outriggers are all in good working order.
- Clear or Avoid Any Hazards
Before any crane movement, you must plan a path and remove all impediments. You should avoid hazards that you cannot relocate, such as electrical lines or other permanent elements, at all costs.
The operator should always maintain a safe distance from power lines too. Plus, you should have a signal person present to guide the crane at all times.
- Stabilizing Your Cranes
Use outriggers or other stabilizing elements on mobile cranes to keep them from tipping over during operation.
Many crane mishaps and tip-overs are caused by incorrect outrigger setup. So be sure you’ve done your homework on the outrigger location.
- Rig Your Crane’s Load Correctly
When you properly rig loads, they are less likely to fall and strike people on the worksite.
You may lift even the most irregular and heavy loads in a safe and secure manner. When operating a crane, you just need the right thorough grasp of force, rigging procedures, and weight distributions.
Read more here to discover quality crane hoists for awkward loads.
Crane Safety Is a Must
Before you set out on any crane work, ensure all the correct crane safety procedures are in place. Having qualified individuals is the key to successful crane operation as they should know all the proper procedures.
Thanks for checking out this article. Feel free to browse our blog for further helpful tips.